Crafting · Tutorials

Revamp a metal tray

I’ve been busy doing some revamping/upcycling this week. I have a metal tray that I really like but wanted to jazz it up a bit. After digging around in my craft stash I found my Annie Sloan chalk paint and some wax paper and knew that I could definitely use those to revamp the tray. I remembered seeing a video a while back about adding typography to wooden items using wax paper and thought I could probably do the same thing with metal so I googled around a bit and found the video again. It is on the Unexpected Elegance blog and you can see it here.

Below is a list of what I used and how my tray looked before the revamp.

I found the graphics I used on The Graphics Fairy, which is a great place to find vintage themed images.

Next I opened the image in Photoshop and flipped it horizontally so that it would print back to front. This means that it will be the right way round once it is transferred onto the tray.

I cut my wax paper to A4 size so it would through my printer and then I printed my image on to the wax side of the wax paper. Make sure to leave it for a few minutes for the ink to dry before you touch it so that you avoid smudges.

This was my printed image.

I then cut round my image leaving a bit of extra space all round.

Then comes the most important part.

Place your image printed side down onto the tray and hold firmly in place with a bit of tape – you do not want it to move at all!

Using a firm edge such as a small ruler or a credit card or something similar rub firmly all over the image. This is what will transfer it on to the surface of the tray. Go over the image a few times to make sure you haven’t missed any bits and then carefully remove the wax paper. You should now have your image right way round on the tray.

I added a couple of coats of Modge Podge to seal it but you could use varnish instead. Hey Presto you have a revamped tray.

I absolutely LOVE my tray now and can’t wait to try this fab technique on lots of other bits and bobs I have in the house waiting for a facelift.

One little tip……….don’t do what I did the first time I read about this technique some years ago and assume wax paper is the same as greaseproof paper or baking parchment. Wax paper is also called freezer paper and one side has a coating of thin wax on it, which is what transfers the image.

We have been having lots of sunny weather here in Northern Ireland so my new tray has been put to good use already.

Have you used this technique for transferring images or text to revamp pieces in your home?

I’d love to hear about it.

Don’t forget to Pin!

Happy May Bank Holday 🙂

 

Tutorials

Make your own Flowers in Jars

I love those little hanging jars with tiny flowers in them that you see everywhere. I have some from Matalan but the jars are green and I really wanted clear ones but couldn’t find what I wanted in the shops so decided to make my own. They are super simple so if you fancy making some yourself, here is how I made mine.

First gather up what you will need.

  • A branch
  • Some small jars
  • Some twine
  • Flowers

I used three jars on my branch but I’m going to make another one with five on it, just go with whatever makes you happy.

Lay out your branch and jars so that you can see how far below the branch you want the jars to hang. Once you are happy with the spacing cut three pieces of twine, the length of each should be about three times the distance from the jar to the branch.

Tie a small loop in each end of your three pieces of twine. This will involve a bit of trial and error until you get the loops in the right position so that your jar will hang where you want it to, allowing a little extra length to allow for tiring it to the branch. Cut off any excess twine. This is what we will use to hang them from the branch. Cut three smaller pieces of twine to go around the neck of each jar.

Find the middle of your long piece of twine and tie it to the branch, making sure the ends are level. Thread the small piece of twine through the loops on the ends of the long piece of twine and tie tightly round the neck of the jar. Repeat for the other two jars.

Put a little water into each jar and pop in a flower or two. Add a hanging loop made from twine.

Hang on the wall. It really is that simple.

If you try this I’d love to know how you got on.

Don’t forget to Pin It if you liked it.

Thanks and have a great weekend x

Tutorials · Uncategorized

How to make an Easter wreath

You know you have a problem with procrastinating when you realise the fabric you bought and the wooden eggs you painted to make an Easter wreath have been sitting there for a couple of years and you still haven’t got round to making it! That was my reality this morning. I was looking on Instagram and saw a lovely floral wreath made by @justlaurajayne so I decided today was the day the wreath would be made.
I thought maybe some of you would be interested to see how I made it so I’ve put together a tutorial to show you what I did.

Make an Easter wreath by RecklessHen
How to make an Easter wreath by RecklessHen

First get together all the supplies you will need. I used

  • a wire wreath frame
  • burlap ribbon or strips of burlap
  • garden wire
  • a selection of Easter decorations
  • hot glue gun
  • glue sticks
  • a bow, or ribbon/fabric to make a bow

Easter wreath supplies by RecklessHen
Easter wreath supplies by RecklessHen

For a 30cm wreath frame you will need about 18-20m of burlap ribbon, depending on how full you want your finished wreath to look. I didn’t have any burlap ribbon but I had quite a bit of burlap fabric so I cut it into 12 strips which were about 1.5m long and 6 inches wide.
Start by folding your burlap in quarters and threading a small length of garden wire through it and twisting to secure it. Then use the wire to attach the burlap to one of the spokes of the frame.

Begin pulling loops of the burlap up through the outer ring on the wreath frame. Next pull a loop up through the middle ring and then through inner ring.

Once you have done these three loops, twist the burlap firmly and work your way back up the wreath frame in the opposite direction, pulling loops of burlap through each segment in the wire frame. Continue doing this until you have all the frame filled.

Secure the end of the burlap to the wire frame in the same way as you did at the start, by threading garden wire through it and twisting round the frame.
Lay out your Easter decorations on top of the wreath until you are happy with how they look and then glue in place.
Easter Wreath by RecklessHen
Easter Wreath by RecklessHen

Make a bow and glue it to the wreath, add a loop of garden wire on the back as a hanger and Hey Presto, it’s finished!
Easter Wreath by RecklessHen
Easter wreath by RecklessHen

My wreath is finally hanging proudly on the door and I am off to put the rest of my Easter decorations up.
Happy Easter x